Hey guys have you heard a new pro lab has opened in sydney called The
Lighthouse. ts run by three guys and offers all the traditional pro lab
services
such as E-6, C-41 and B&W process / proof and print and sells the

I'd  like  to  process  E-6  in  my  home darkroom, but I'm not sure which
chemcals  to  use. There are Fuji Hunt and Tetenal available on the market
and  it's  prices are very close. I mostly shoot Fuji slides, so Fuji Hunt
should  be  natural  choice, but as we all know, it's not ...

Time to move on, life goes on. As we focus on friendships and what
really matters one thing becomes apparent, that is how important it is
to have the rights and freedom to express ourselves in this world.
Photography can be a great means of expression, tempered with

I'd like to find a fluid mounting gizmo for an Omega D5. Is there, was there
such a thing?

I recently liberated a box of old photos and negatives from my grandfather's
personal effects. Along with the developed items, I found three rolls of
apparently
exposed but undeveloped 35mm film. One is Kodak "Panatomic," and the other

September 8, 2006, from Lloyd Erlick,
As I continue to swim against the stream of
life, I find I require a 24x30 plastic
processing tray. (It's for a secret new

Hot off the press:
The Darkroom Automation Precision Enlarging Meter
Darkroom Automation's enlarging meter provides 0.01 stop resolution over
a ten stop range, making it easy to hit highlights and shadows on the first

I shot a roll from a package of 220 Ektachrome 64 Professional slide
film, but asked for prints.  The first roll came back from the
processing lab uniformly orange.  The image was there, but just in
shades of orange and black.  The dealer who sent it to the processor

thank you.
-
woody

I wanted to printed a 35mm to included the sprocket holes and film
information. I thought I'd us a surplus 4x5 glass Beseler carrier. It
appears now that I'm getting Newton's rings on the prints. My question is:
why did they bother making a glass carrier with non AN glass if it ...

hi, i made a pinhole camera and it is completly light sealed except for
the little pinhole. when i did my prints, i left them in the camera for
a variety of times, (40 seconds, 1 minute,          7 minutes) but
every single one didnt come out at all after i developed them. when i