Here's a silly question...
Has anyone ever tried reversal processing a C-41 monochrome film like
XP2 in E6 chemistry?  I know there are some crazy people who've done
it with standard films like Fuji NPS and the like.  I'm wondering if I

I have a Chrometrol (Chromega control) power supply for the Chromega D5
head.
If I turn it on when the Focus switch is on, the high-temp wires that
connect the bulb will arc to the closest piece of steel, and burn into two

http://cgi.ebay.com/Shanghai-B-W-Negative-Camera-Sheet-Film-4x5-ISO-100_W0QQitem
Z230012235113QQihZ013QQcategoryZ4204QQrdZ1QQcmdZViewItem
Enjoy. :)

I have an unconfirmed report Kodak has discontinued 16x20 and other
large size cut color RA paper. Anybody know for sure?

You can have any piece of equipment, but unless you have the nuts to
rip it apart  with your bear hands and figure out how it works you don't
have jack for understanding.

to fix a roll of hp5, the ilford data-sheet on their website says that
i should use a 1+4 dilution of ilford rapid fixer, but i have a 1+9
dilution already mixed up; i'm wondering if i could just double the
fixing time and use the 1+9 instead of the 1+4 (as the 'strength' of

Please Visit the link:
http://www.how-to-save-water.blogspot.com

I tried to access APUG today and no response. What's happening with them?
Glenn Booth

Does anyone have time-temp info for this developer? Info is in short supply
and the massive dev chart doesn't have anything either.

There is a new service out (blurb.com) that offers to make
single copies of bound books from uploaded material. They
supply a layout package and the creator (us) selects images
and text to make a final design.

For many years labs have sprayed color prints with lacquer. I have heard
that the new Kodak Endura RA4 papers are not suitable for lacquer
spraying and it may actually damage or reduce the longevity of the
image. Is this true?

Greetings all;
Firstly I do admit I am sort of cross-posting from rec.photo.film+labs
but I posted there a week ago and didn't see any response, hence my now
asking on this group.

Heya,
Quick question
I just bought a Beseler 67s dichro head. It has it's own power supply
built in, it converts the 120volts from the wall down to 82volts (85

I have purchased a used model Jumbo 150 and it has some remaining
adhesive ( I assume ) on the heating press platen.  Any suggestion on
how to remove the residue?
Thanks in advance..

Has anyone seen the new Azo stock yet?