| Thread | Last Post | Replies |
|
| Focusing Scope with BLUE filter? | 13 Jun 2006 03:39 GMT | 12 |
I picked up a focusing scope which has a deep blue filter that flips into the eyepiece. (In fact, it's in there as the default position.) What's the purpose of it? To enhance viewing contrast? Focus UV?
|
| EFKE | 12 Jun 2006 20:14 GMT | 24 |
I was looking for some 25 speed b/w film and read about one called Efke. Has anyone used this film?
|
| nor should the fumes be breathed | 12 Jun 2006 11:31 GMT | 5 |
Fixing Solutions. For positives: Cyanide of potassium, 120 grs.; nitrate of silver, 6 grs.; water, 10 oz. When this solution requires more than a
|
| Anyone know who makes "Ultrafine" films? | 12 Jun 2006 01:30 GMT | 9 |
Well, does anyone? (Advertised on eBay.) -Lew
|
| Arbitrary temperature for paper processing | 11 Jun 2006 11:42 GMT | 18 |
i am think if it is legal to use arbitrary processing ( solutions ) temperatures for paper processing. the basic idea is that i want to adjust exposure time to compensate differences between actual processing temperature and standard 68F.
|
| A Question about Color Balancing | 11 Jun 2006 04:39 GMT | 1 |
I have been doing color RA-4 printing for a short period of time and want to know if you stick with the same brand of film,(Fuji), but use different types,( Superia or Reala CS); does your basic filter pack change much? Thanks,
|
| Question about Jobo Processors and Expert Drums | 08 Jun 2006 14:51 GMT | 5 |
I recently acquired a Jobo CPA-2 processor and a couple of their "regular" drums. However I'd like to use the processor with Jobo Expert drums. The obstacle to that is the roller-assembly toward the back of the lift -- it's too small to accomodate the larger-size
|
| sheet film | 08 Jun 2006 03:58 GMT | 1 |
I have a Graphlex and 2 sheet film holders... 2X3 It has been a while since I loaded new sheets... Im trying to remember, there is a way to insure the sheet is emulsoin side up, there is a notch on teh end, offset from center: if you hold the film
|
| Problems with print to print consistensy | 08 Jun 2006 02:54 GMT | 15 |
I have recently had som problems with some portraits I was doing in black and white. Basicly what I'm trying to achieve is to make multiple copies (3-4) of the same print. Basicly what I'm doing is:
|
| how about my photos ? Thank you | 06 Jun 2006 19:04 GMT | 2 |
thanks to visit my photos at: www.artofcolor.it Click "Enter", Guest", then "Alberto". There are 2 sections: misc b&w photos, and "danceability" photos. Send any suggestions or comments at the mail address write on the
|
| Darkroom suplies availability in India? | 06 Jun 2006 09:34 GMT | 2 |
I may have the opportunity in the future to live in India for a while. Just a brief question - does anyone know of how darkroom supplies availability are over there? E.g. availability of chemicals, negatives and papers? Any indians here in the newsgroups?
|
| Just curious: Why does kodak package HCA to make 1.25 gallons? | 05 Jun 2006 18:27 GMT | 2 |
Who has a 1.25 gallon container? Sure, you can use a larger container, but why not just package it to make 1 gallon of working solution?
|
| HELP: Beseler 23C II Lens won't screw in | 01 Jun 2006 13:13 GMT | 13 |
I just got a second hand enlarger, and I noticed it came with a 75mm lens, I unscrewed the 50mm one that was loose to begin with (Too loose to adjust the aperture) and now the 75mm won't screw in. There is a metal ring in the (?) lens board (?) and it's loose. Nothing snapped,
|