I have not found a discussion of this issue (or non-issue) anywhere:
When you are in the process of selenium toning multiple prints, does it
matter how you store the prints between the selenium bath and the HCA?
I'm assuming that the toning process ends when the print is removed

I just got one of these lights from that big auction thing...
It's quite a nice light, but I can't find any particulars about
the bulb anywhere, at least following a bunch of links from
Google.  The best I get is that it's expensive and hard to

First of all, let me apologize for this off topic post. Could you
please direct me to the appropriate newsgroup? I couldn't find one
quite right.
My question was just this. If a light meter suggests an exposure of 4

How can I know when my film developer has had it? I know many will tell
me to mix a new batch every session, but the fact is I can't afford it
(even buying bulk chemicals which I have looked into and will probably
do in the future).

http://www.jobo-usa.com/
I've known this was going to happen for about a month.

     I got a good deal on a Dichro head. Beseler no longer makes the
adapter to mount the head to the CB-7. Of course I've never seen the adapter
either. So any hints? From just resting the head on the enlarger it seems
all the adapter would do is provide a smaller hole. My first ...

Hi guys, hope you can help.
I am trying to eliminate some hazards from my process and have been
struggling with keeping the temperatures of all my B&W chemicals and
final wash to be the same temperature.

It's currently winter here in Australia, and I'm having no problem
maintaining 20C for B&W processing. However we are fast approaching summer,
and last summer I had no end of trouble trying to keep temps down that low.
With room temperatures in the high 30s and tap water temp in ...

Thank you all for your help on my last question.
I've been developing for a couple months now and I have a few questions
regarding temperature, if you don't mind.
1) If I develop with the chemicals at 24C instead of 20C, and I make

Can anyone tell me about how TMAX developer is regarding contrast and
grain?  Is it low contrast like D23?  Is it fine grain like D76?  
Thanks to any who can toss in their 2c!
Jerry

Thanks to those who helped me with this. I now understand why
temperature is important. I didn't know that before (or didn't really
think about it).
To those who have treated me like an idiot, shame on you. I once asked

What methods do people recommend for getting chemicals to the correct
"operating temperature"? Warm bath, on the stove, blowtorch, what?
tia,
rts

If anyone has the formula for Kodak D-79 (Pyro tank developer)
would they post it please? Thanks.
Mike

Just curious about the stain induced by the afterbath when using PMK. How
much of the stain is created during the afterbath, and, if the recommended 2
minutes is good, why wouldn't 5 or 15 minutes be better?
-Lew

Where do your pictures come from?  Here's a google map that you can put
a marker on so we can see where, around the world, your pictures come
from:
http://myguestmap.lorca.eti.br/guestmap.jsp?id=rexthestrange&locale=en