Is this an actual color photo, or is it a very good paint-over?
The postcard is from around 1905.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2230969023
Thanks

Hey everyone,
My local mat & Framed distributor here in Sacramento
informed me today that 3-M Positional Mounting Adhesive
is being discontinued.  I'll scratch that one as my photo

I've heard that negatives kept overlong in a typical rapid fixer will
develop certain problems. Is this true of alkaline fixers as well? Are
alkaline fixers are less prone to damage negatives dunked in them for, say,
an hour?

I know that Agfa Rodinal Special is the same than Studional. Is there
any relation between Rodinal and Rodinal Special or are they totally
different?
Thanks

Hi people!
In these days I'm looking at the different recepies for home made
developer and their effect on the paper. I found that generally
speaking the restrainer can induce a tone in the print - high

I've read Phil Davis's description of using a dedicated spotmeter as a
densitometer and have found various postings from this newsgroup on
the topic. I don't have a dedicated spotmeter, but my Nikon F4 does
have a spotmeter mode for its build-in light meter. This meter gives

in the end of this month i'll be able to do some photo journalism.
i suppose that conditions will be far from ideal.
so i have some time to test kodak t-max p3200 film.
inside the film box i've found development times table.

Is there any difference in the developing time between the old T-Max 100 and
the new version 100 T-Max.
Thanks
Bill

I understand the 810 conversion kit will only allow use of a 240mm
lens (Beseler recommending a copy lens for use with the kit).  I could
assume I can use a Componon or Rodagon 240mm lens, but thought I'd ask
current/past users what other lenses have been found to work.

Anyone have any experience with Bergger VC B&W paper? Opinions and
evaluation would be appreciated.
Thanx
Phil

I have a Beautiful Beseler CB7 with the Dichro DG colorhead. I hate to
let it go. Anyone interested?

I am looking at setting up a dark room in my bsmt. The only problem is
my bsmt is unfinished, which means it's all empty and to put up dry
walls to build a room it'll cost me lots of $$$. Has any one ever
setup a room for printing and processing in an environment like this

Hi--What does it mean for something to be diluted 1:50? In terms of
ounces and mililiters? What do the "parts" mean. In other words, of
you say one part developer, 3 parts water, what does that mean in
terms of ounces and mililiters?

I've read most of the ventilation posts in the previous months. I
understand positive pressure and filtration. I've reviewed all the
literature I could find on the internet.
I have a register hooked up to the central air system that is in the space

Wich differences?
I mean, what will be the result on a Kodak 400TX?
For new tri-x, exposed at 320, wich time with D76?
Thanks a lot.