| Thread | Last Post | Replies |
|
| FA: Saunders Omega Print/Repeat easel | 27 Mar 2004 04:21 GMT | 1 |
After 20 years of happiness, I'm finally going to part with my trusty ol' 8x10 Print/Repeat easel. This is the heavy duty one that allows you to print combinations of (1) 8x10, (2) 5x7, (4) 4x5, (4) 3.5x5 and (8) 2.25x3.25 prints on a single sheet of 8x10 paper. Unlike the
|
| vertical print developing tank | 26 Mar 2004 23:10 GMT | 3 |
I'm interested in buying one of these but have a few questions: 1) Does anyone besides Nova make them? 2) Is there any good way to keep the chemistry below ambient air temperature? A few models have heaters, but keeping things cool seems
|
| color analyzer | 26 Mar 2004 21:57 GMT | 5 |
I've got an old color analzyer called a Colormate Marc I. It seems to be well-made and in functioning condition. However I don't see the point. I made my first RA-4 print last night using Kodak Print Viewing Filters. I then attempted to "program" the
|
| Help - Manual for Durst AC800 enlarger | 26 Mar 2004 21:16 GMT | 1 |
I am looking for an instruction manual for a Durst AC800 enlarger or even a photocopy of one I would appreciate any help Regards
|
| Lucky 70M Enlarger | 26 Mar 2004 04:36 GMT | 3 |
I was just fortunate enough to recently be given the above enlarger as a gift. I plan on building a darkroom in my basement and this is basically the first component I have. My question is can anyone point me to a place where I can
|
| Agfa atomal | 25 Mar 2004 08:35 GMT | 5 |
I would like to know how I can use Agfa Atomal, I mean that I don't understand if I must use in stock solution, one shot or what?? Thank you for any suggestion.
|
| Targeted attack on this NG | 24 Mar 2004 16:06 GMT | 1 |
I started receiving e-mail with malicious virus attachments from forged addresses pretending to be from people on the NG that I would normally read their mail. I think it's a little too coincidental for a harvester to match up the people that I correspond with. If this virus gets ...
|
| Good luck buying film! | 24 Mar 2004 04:17 GMT | 9 |
Thanks for the vendor leads! I placed a nice order with B&H and they notified me of shipping in a few hours! No endorsement mind you, I don't have the stuff yet! I bought some 100' ers of T-max in 100 and 400 and am wondering if there is
|
| Fortepan 400 | 22 Mar 2004 20:32 GMT | 4 |
I would like to know if anybody has any experience with this film ?
|
| Inexpensive ph meter | 22 Mar 2004 02:42 GMT | 53 |
I'd like some assistance choosing an inexpensive, good-enough-for-photo chemistry ph meter. Anyone? -Lew
|
| Camera Club | 21 Mar 2004 23:31 GMT | 3 |
I hope this is permissible advertising my camera club http://www.photocraft.org.uk/ which is in Wallington London England you are welcome to visit us we have a mix of traditional wet (darkroom) and Digital photographers.
|
| help with apo rodagon lenses | 21 Mar 2004 19:21 GMT | 11 |
What's the difference between a 50mm apo-rodagon and a 50mm apo-rodagon n? Thanks, Hugh Reilly
|
| Bad luck buying film | 21 Mar 2004 15:32 GMT | 13 |
In the past two months I have placed orders with 3 companies on-line for bulk 35 mm film. I'm still waiting! I'm not a bad person and I haven't vented my spleen on any of these vendors...yet. I did receive some of the items I ordered from 1 firm with no paperwork or any ...
|
| repairing negative with dichroic fog? | 21 Mar 2004 12:42 GMT | 9 |
I have several Plus-X negatives that have a mottled base fog with transmitted light and a metallic sheen with reflected. I think this is dichroic fog; it took me around six months to identify this problem, so the negatives have been sitting in their negative sheets for quite some ...
|
| Model Release Form | 21 Mar 2004 08:51 GMT | 3 |
I have written a script on the Net that will make a full model release form by just filling in a few blanks. It pops the form up in your browser and you just print it off. It takes into account gender, age of model, US or UK English. It is a short form, but still assigns the
|