I am a student at Utah State University, and am doing a portfoloio on night
photography.  I have always been mezmerized by the bright lights against a
black night sky, and being able to see what things are.
I was interested in getting some ideas for good subjects for my photographs.

I am posting some brief and very useful information concerning a new
product in the Photography Industry. The product by the name of
ArtShield is a clear coating designed to protect and enhance the
longevity of fine art, graphics and photographs (both chemical and

Hi, what are advantages (if any) using Delagi #8 instead POTA with Tech Pan?
Thanks
piterengel

I'm interested in finding a master printing workshop, or private
instruction. I would like to find a true master printer that is not
1.) alternative process oriented 2.) masking oriented 3.) toner
oriented 4.) or any other whistle and gong. My idea of a great printer

I want to make a calender, by printing the calender grid thing on the
back of some RC prints, then spiral binding them together.  I have
been using Ilford RC paper, but am having a hard time finding
something that will print on the back - if I use an inkjet (Epson

Hello,
Thre are rapid fixers made by mixing hypo with ammonium chloride or
sulphate (Kodak's F-7 and F-9).
It just happens that Kodak F-7 uses 50g of chloride, F-9 uses 60g of

I need some help.  I have been making some 8x10 prints from 4x5 slides using
my 150mm rodenstock rodagon lens.
For the most part my prints are full frame.  I am getting one corner that is
not sharp and in fact it looks like movement.  It always happens in the same

Hi, I would like to use MACO IR 820C film. I've red a lot about this
film, now I need to hear something form who tried it. In particular:
- kind of develop: D76, Xtol, what else?
- kind of fixing bath: on www.mahn.net, the web site of Maco's

Hello,
Just purchased a used Thermaphot ACP200 processor.
Looks fairly simple but I would like a manual.
Anybody know of a source?

wir behandeln zur Zeit in Kunst (12. Klasse Gymnasium) das Thema Foto und
Film. Es wurden Referate ausgegeben. Ich erhielt das Thema "Funktionsweise
des Greifermechanismuses einer Arriflex 35mm Filmkamera". Dummerweise kann
ich mir unter dem Thema nicht wirklich viel vorstellen. ...

I'd like to be able to plug my Unicolor motor into a timer. Can someone
recommend one? It would have to read in minutes and seconds and I would
prefer a digital readout. Some of the enlarger timers might work, but often
they only read in seconds.

What is the useful capacity of Kodak rapid selenium toner?  The label
indicates at least 100 8x10 per gallon diluted 1:3.
I've been using a 1:20 dilution.  Is the logic such that the quart
mixed with 20 quarts to make 5.25 gallons 1:20 would still do only

I was wondering whether anyone else had this combination of timer and
analyser and is connecting the two so that the measured reading from
the Zonemaster is automatically passed onto the StopClock?
I'm having a problem when the two are connected where it is taking an

While using print paper has anybody ever experienced
latent image decay? If so how lengthy were the times?  Dan

I'm looking for knowledge sources on photoceremic processess. Unfortunately
I can't find it in my library, because ... I'm living in Poland and theres
no any good position.
Does anybody know where Can I find this knowledge ?