If anyone needs a very nice safelight (Kodak
Utility, model D), see
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=
2976959029

Our Company Liquiguard Technologies Inc. is an innovator of new and
unique protective coatings for use on everyday objects and specialized
applications. Commonly available coatings have a basic polymer
composition. Liquiguard Technologies coatings are complex formulations

Calling all "zoneheads" or people with experience adjusting development
times...
I'm trying to work out a development time for Fuji Neopan 400 (a rather old
batch) in HC-110 "half B" (half the strength of dilution B).

Not having received my step tablets from Stoufers, having several
rolls of exposed 35mm T-MAX accumulated, and having, finally, got the
home darkroom prepared to use, I am, momentously, ready to develop my
first rolls of film at home. From reading Davies (can we please not

After a half year of preparation I succeded in making my first contrast mask
to be used
for making Ilfochrome prints. It was a mixture between Lynn Radeka and
Ctein. From Ctein I got the idea to use 4x5" TMAX100 and Muir SoftShot

For the past four years, I have been working out of a 'temporary'
darkroom, while I planned and built my new darkroom.  The new darkroom
is now finished, and my beloved drum dryer (an Omega), is back in the
darkroom (there wasn't enough room for it in the temp darkroom).

Does anyone know where rec.photo.darkroom went to?  It's sure not here
anymore..

The best response to those who would do evil in the dark is to turn on the
light.  Below is the last post made by "JJS" in the thread titled "Why WOULD
anyone want to use VFD in 35mm?"
"Harvest == dclark@bcpl.not  (DSC changed the address for purposes of this

i have problem with developing some rolls od kodachrome 64, purchase from
usa via ebay...
i don't have mailers for that films, can i send him in wienna or some other
europe laboratory and pay with some way (bank, western union, cash..)??

I was printing at a freinds house recently and he has a high heat dryer (Ilford). I was amazed at how gloosy the RC gloss prints came out. Drying at room temperature leaves RC gloss with a hazy film. Does the group have any techniques for achieving the degree of gloss on this ...

I am working on a, as they call it "mixed media" project where I want
to completely strip a negative clean and transfer it like an iron-on
to another material.  I'm sure there is a solvent that will do
this...But what?    

I'm about to test some plain vanilla ammonium thiosulfate from Photo.
Formulary and have been asked of the capacity of Kodafix, so I checked
Kodak's site. They claim 26 8x10s per liter at the 1 + 7 dilution.
I'll be checking the volume needed of the 60% concentrate I've got.

I'm looking for assistance in identifying a couple of negative carrier
is that I want to sell. I no longer have an enlarger, so the obvious
first step is ruled out!
http://home.earthlink.net/~jonsachs/PB115599-s.jpg

It's my first post here so I'm not quite sure of protocol as yet however
if anyone can point me in the right direction I would be appreciative.
I would like to engage in processing C41 films in my Jobo ATL-1 using
1540 tanks. Could anyone who has suitable experience indicate what ...

I noticed the other day that the expiration date on my Staticmaster
brush has passed (by a couple of years!).  I've looked on the net to
no avail - the only replacement cartridges I can locate (several sources)
are the 1" size.  I really like the 3", it allows me to do 120 negatives