| Thread | Last Post | Replies |
|
| Lauder Chemical Problems? | 17 Oct 2003 13:14 GMT | 1 |
The last few months I have been noticing more problems with the film fixer/hardener from Lauder Chemicals. A week or so after opening the bottle, the fixer either becomes very cloudy or small particles are seen floating about. Also had problems with two recent bottles of
|
| If you hear a rumour | 17 Oct 2003 02:55 GMT | 7 |
Keep it to yourself..... The silliest, most nonsensical things are repeated until they become fact: 'Kodachrome hurts the environment....'
|
| Potassium Ferrocynanide and fixers | 16 Oct 2003 23:10 GMT | 3 |
I thought I read somewhere that when using potassium ferricyanide, one should only use plain fixer without hardener. However, in my current research, I can't find any indication of such. Can anyone tell me if there are any problems with working with fixers containing hardeners, for ...
|
| re Sekonic L-518 | 16 Oct 2003 22:40 GMT | 1 |
Can anyone out there help? I'm trying to find information about the Digipro L-518, specifically how to adjust the ISO setting. Sekonic's help only extends to the USA, which isn't much help to anyone "down under". Stan
|
| beseler pm2l | 16 Oct 2003 21:19 GMT | 10 |
How good are the Beseler PM2L color analyzers that I often see on ebay. Are these units very old and therefore maybe unreliable? Don
|
| fuji across 100 | 16 Oct 2003 13:03 GMT | 4 |
What is developing times in Rodinal, Rodinal Special and D76? Thanx!
|
| Kodak to stop film and paper production? | 16 Oct 2003 04:50 GMT | 31 |
I heared a rumour that Kodak will give up its silver based photo products (film, paper and chemistry) in near future. Is there something to it?
|
| Uneven PMK 120 negs in JOBO ATL 1500 | 15 Oct 2003 23:43 GMT | 1 |
I've been happily developing my 4X5 negs in a JOBO ATL 1500, using the 2500 series tank, which holds up to 12 at a time. No problems — and a nice stain — with split developing solutions to deal with oxidation, and Sodium Metaborate pre and post-soaks built into the cycle.
|
| SLIMT - Why Is It Ignored? | 15 Oct 2003 10:19 GMT | 14 |
The method is child's play and quickly done. Has anyone given it a try? Does it really work well? Dan
|
| Funny problem | 15 Oct 2003 04:54 GMT | 9 |
I've developed a 15 frames strip of 125PX 35mm film. Negatives are OK, leader is as black as usual. But frame numbers are quite light, as if heavily underdeveloped. Has anubody seen this before?
|
| Traditional printing vs. scanning film and digitial manipulation | 14 Oct 2003 16:10 GMT | 35 |
As a teenager and did my own B&W processing and printing. Now, more than twenty years later, I am getting back into photography and things have changed quite a bit. A reasonably-abled digital camera (like higher than 5 mega pixels) is
|
| What developer to use with Delta 100? | 14 Oct 2003 13:14 GMT | 9 |
With all that Kodak is going through I thought that it might be time to give Ilford's Delta 100 a try. Not to long ago I went out and bought a box of 25 sheets to run my film speed and development tests with. Unfortunately I'm not sure what developer to use. Of course I want it
|
| The effects of daylight on chemistry | 14 Oct 2003 01:31 GMT | 2 |
Alrighty, just came across some fixer that was displaced during the move to our new home (see http://www.darkroompro.com/images/photos/misc/smhouse.jpg ) It was stored in a 5 gallon tank with a floating lid. Unfortunately it's also been stored outside in daylight since June. The ...
|
| Can T-Max 3200 be dev. in HC110 | 13 Oct 2003 23:33 GMT | 2 |
Can T-Max 3200 be developed in HC 110? Any times appreciated. Thanks in advance. Ray
|
| a wierd outcome | 13 Oct 2003 21:12 GMT | 9 |
I have just started developing my first black and white negs and have come across an interesting problem, half way through the film there is about 5 frames that are completly devolped, but completly clear has any body got any ideas?, as far as i know my camera is working fine and ...
|