Help Needed - Cabin projector question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

PRP - 09 Aug 2006 10:55 GMT

Hi, I am trying to find out which bulb would go in a Cabin 1000A slide
projector. The manual says it is 240V 300W with a G17q base, looking I see 2
possible bulbs one is an A1/178 (CFS) the other is an A1/201 (CXH) but can't
figure out which is the right one. The bulb in the projector has the marking
KP-TF/10 but I can't match this up to the either of the bulbs I see listed.
Any thoughts or suggestions would be appreciated.

Reply to this Message

Joe Morris - 11 Aug 2006 14:20 GMT

>Hi, I am trying to find out which bulb would go in a Cabin 1000A slide
>projector. The manual says it is 240V 300W with a G17q base, looking I see 2
>possible bulbs one is an A1/178 (CFS) the other is an A1/201 (CXH) but can't
>figure out which is the right one. The bulb in the projector has the marking
>KP-TF/10 but I can't match this up to the either of the bulbs I see listed.
>Any thoughts or suggestions would be appreciated.

A bit of poking yielded notes that both the A1/178 and A1/201 are 240V,
300W, in a G17q base. The notes I see for the KP-TF/10 show (correctly
or not; I can't vouch for the info) numerous flavors of KP-TF/10, with
various voltages and power ratings, identified by additional characters
following "KP-TF/10". (Try http://www.donsbulbs.com for an index of
various flavors of this type of bulb.)

Joe Morris

Reply to this Message

PRP - 12 Aug 2006 11:19 GMT

>>Hi, I am trying to find out which bulb would go in a Cabin 1000A slide
>>projector. The manual says it is 240V 300W with a G17q base, looking I see
[quoted text clipped - 15 lines]
>
> Joe Morris

Thanks for the help, unfortunately I still can't confirm which bulb it is of
those two but based on what I see i'm gonna take a stab at the A1/178.

Reply to this Message