According to Jürgen Exner <jurgenex@hotmail.com>:
> > I have the Epson Stylus PhotoRX500 It will not read nor even
> > recognize this new memory card.
[quoted text clipped - 8 lines]
> Rewrite the firmware in your printer or ask Epson if they have a firmware
> update?
Or use your computer to copy the images to two 1.0 GB cards --
assuming that you have verified that the printer will deal with those
cards.
Good Luck,
DoN.

Signature
Email: <dnichols@d-and-d.com> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Not Disclosed - 29 Jul 2007 23:19 GMT
> According to Jürgen Exner <jurgenex@hotmail.com>:
>>> I have the Epson Stylus PhotoRX500 It will not read nor even
[quoted text clipped - 11 lines]
> assuming that you have verified that the printer will deal with those
> cards.
Just run the card from your PC into your computer, it is easier than
replacing the printer.
I know it's not as convenient as popping the card into the printer, but
the RX500 pre-dates 2 GB SD cards.