This is a duplicate post from my posting in rec.photo.digital (Just
covering all bases)
I'm having a heck of a time keeping focus on moving objects w/ my D200.
I'm using a 200-400 f/4 on it, and it's set to "Active" focusing, I've
tried all sorts of combinations on the D200.
I set it to Constant focusing (Of course), I've tried the AF area mode
settings on group, dynamic...all of them, with various combinations
with metering selections.
When I'm doing wildlife or cars, I can't seem to keep the object in
focus as I pan without releasing & re-depressing the shutter release
for exposure reading. I expect that once I compose the object, take a
meter reading & hod the shutter release down part-way, the lens/camera
should hold focus as I pan.
Any suggestions?
Thanks much!!
Paul Furman - 26 Jan 2007 17:26 GMT
> This is a duplicate post from my posting in rec.photo.digital (Just
> covering all bases)
[quoted text clipped - 15 lines]
> meter reading & hod the shutter release down part-way, the lens/camera
> should hold focus as I pan.
Check the manual/menus, you may have to change the settings of the AF/AE
lock button. Why are you holding the shutter halfway, to lock exposure?
Ed Ruf (REPLY to E-MAIL IN SIG!) - 27 Jan 2007 00:50 GMT
>I set it to Constant focusing (Of course), I've tried the AF area mode
>settings on group, dynamic...all of them, with various combinations
>with metering selections.
???? CONSTANT focusing? Thought you said you were using AF-C servo mode. C
means CONTINUOUS.

Signature
Ed Ruf (Usenet2@EdwardGRuf.com)
http://edwardgruf.com/Digital_Photography/General/index.html
Jeremy Nixon - 27 Jan 2007 03:18 GMT
> When I'm doing wildlife or cars, I can't seem to keep the object in
> focus as I pan without releasing & re-depressing the shutter release
> for exposure reading. I expect that once I compose the object, take a
> meter reading & hod the shutter release down part-way, the lens/camera
> should hold focus as I pan.
It's not entirely clear which behavior you're after. If you have it in
continuous AF mode, then as long as you hold the shutter release halfway,
the camera will continue to re-focus on whatever the focus point is on.
In single-AF mode, it will focus on the point once and then lock there
while you hold the button down, and not re-focus until you release the
button and press it again.

Signature
Jeremy | jeremy@exit109.com
Michael Schnell - 27 Jan 2007 09:57 GMT
If it does not work the camera or the lens is broken or they don't work
together well. My wife mostly does moving horse with her D200 and never
reported such problems with several lenses (most are original Nikon).
-Michael