The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
increments in between.
Assuming that I want "one under, one over, and one right on" what determines
whether I go in steps of 1/3, 1/2, or a full EV?
Are there any guidelines for choosing?
What do most people use?
Gordon
dylan - 13 Aug 2006 12:59 GMT
> The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
> increments in between.
> Assuming that I want "one under, one over, and one right on" what determines
> whether I go in steps of 1/3, 1/2, or a full EV?
> Are there any guidelines for choosing?
> Gordon
I would say the contrast range of the scene and what you are trying to
achieve in the image eg if you can't capture the entire dynamic range
you have to decide which bits you want to be correctly exposed and
which bits not.
Bill - 13 Aug 2006 17:54 GMT
>The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
>increments in between.
>
>Assuming that I want "one under, one over, and one right on" what determines
>whether I go in steps of 1/3, 1/2, or a full EV?
The brightness and dynamic range of the scene.
>Are there any guidelines for choosing?
Yes. A 1/3 stop is a noticeable boost or cut in brightness level, but
not a dramatic change.
>What do most people use?
I don't really know since I still haven't talked to everyone...it's a
lot of people you know.
:-)
But I think the general consensus is that 1/3 is the common value used
to bracket a typical shot.
Tom - 14 Aug 2006 02:26 GMT
>The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
>increments in between.
>
>Assuming that I want "one under, one over, and one right on" what determines
>whether I go in steps of 1/3, 1/2, or a full EV?
>
... am I correct in my understanding that the f-stop & shutter speed are
set, so exposure bracketing happens between the sensor and the saved
file..therfore I have exactly the same result (and much more) if I shoot
RAW and then adjust exposure comp on the RAW file...eg via Raw Shooter?
- thanks -
BobF@nospam.com - 14 Aug 2006 04:01 GMT
>... am I correct in my understanding that the f-stop & shutter speed are
>set, so exposure bracketing happens between the sensor and the saved
>file..therfore I have exactly the same result (and much more) if I shoot
>RAW and then adjust exposure comp on the RAW file...eg via Raw Shooter?
> - thanks -
Not necessarily - bracketing will change the exposure of the shot if you pick
exposure or flash bracketing, and you will need to take 2 or 3 pictures to
complete the series.
These 2 or 3 pictures will have different settings and different levels of dark
and light and maybe burned white or black pixel areas.
If you pick white balance, the camera takes only one picture but creates 2 or 3
versions with different WB. This only works in JPG. RAW doesn't have WB.
If you shoot RAW - don't worry about WB bracketing!
Jan Böhme - 14 Aug 2006 13:19 GMT
Iceberg Concept, Inc. skrev:
> The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
> increments in between.
> Assuming that I want "one under, one over, and one right on" what determines
> whether I go in steps of 1/3, 1/2, or a full EV?
> Are there any guidelines for choosing?
> What do most people use?
I don't know. I can only tell you what I use. I almost never bother
with bracketing by 1/3 of a stop, except possibly as a learning
excercise. If I shoot RAW, I almost always will have that kind of
leeway within one exposure, and also with JPEG:s, I normaly prefer an
exposure compensation of -1/3, to be corrected if needed with "levels"
in Photoshop, to fiddling with bracketing, if I'm afraid of blowing
highlights.
Thus, I never bracket for fine-tuning. I only bracket when I don't
really have a clue. The smallest bracketing interval I would use is 2/3
of a stop. That or a full stop is probably what I use the most.
Jan Böhme
POHB - 14 Aug 2006 15:44 GMT
> Assuming that I want "one under, one over, and one right on" what determines
> whether I go in steps of 1/3, 1/2, or a full EV?
If I'm in a hurry and I can see the scene has a lot of highlights and
shadows that might fool the auto-exposure I'll usually go + and - 0.7.
Sometimes I just can't be bothered to try to get it right first time
and I'd rather take loads and chuck the rubbish away later.
Ole Larsen - 14 Aug 2006 19:24 GMT
Iceberg Concept, Inc. skrev:
> The D70 gives a range of exposure bracketing from -2EV to +2EV with numerous
> increments in between.
[quoted text clipped - 3 lines]
>
> Are there any guidelines for choosing?
Bracketing, in my opinion, is mostly called for in high contrast scenes
(bright sun and shadows) and even -1,0,+1 isnt always enough. Lately I
did a little testing of the useability of Photoshops HDR function and
-1EV and -2, 0, +2 for bracketing was fine when the goal was a blending
of 3 exposures. The result of my first test of HDR ever:
http://www.olelarsen.eu/HDRTest/0001hdr.jpg

Signature
Med venlig hilsen, Ole Larsen.
New Images And Design, aug. 2006
http://Olelarsen.eu/
http://home.tiscali.dk/muggler