WANTED: Omega D-2 Lens Cone and Lens disc 421-102 421-008

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

happyheathen - 08 Nov 2004 00:00 GMT

Hi -

Sorry to clutter this board, but:

I need the 4 1/2" lens cone for the D-2, and the lens disc for 50mm
mount. If the part numbers appear (they don't always) they are 421-102
and 421-008.
I want these to use with the Componon-s 150mm lens.

Appearance not important - I can refinish them if needed - they just
need to be straight and light-tight.
If you have either and/or both, please drop me an email at:
(bushy_hare 'at' yahoo.com)

Thanks!

Reply to this Message

Mike King - 08 Nov 2004 01:53 GMT

http://www.classic-enlargers.com/

This cone is not a very common item used, Harry might be your only source,
he has new ones that were custom made for him. Or do what I did and make an
extension ring. I used the top to a can of spray paint, cut the top out and
attached the lensboard to the cone with longer screws using the lid as a
spacer. The lip on the can lid fit perfectly in the hole in the cone. Also
worked great for making reductions with the 135mm lens on the same cone.

You might also post to rec.photo.marketplace.darkroom

and http://www.khbphotografix.com/omega/

Signature

darkroommike

----------

> Hi -
>
[quoted text clipped - 11 lines]
>
> Thanks!

Reply to this Message